What’s In The Box
S1F2 payment terminal
USB cable and region-specific power plug for charging
SIM card
Receipt paper roll
Insert the paper roll and power up the terminal
Pull up the cover of the paper roll compartment and insert the paper roll, making sure the paper sticks out a bit.
Close the cover of the paper roll compartment.
Connect the terminal to a power supply. Press and hold the power button until the
display turns on.
Let the battery charge for at least for hours while you continue with the next steps.
On the Welcome screen, select your language.
Connect the terminal to your network
After selecting your language on the Welcome screen, select the arrow button.
On the Setup Wi-Fi screen, select the + sign.
Turn on the WLAN toggle switch.
Select a Wi-Fi network from the list, or select the + sign and add the name (SSID) of
the Wi-Fi network.
Enter the Wi-Fi password.
Select OK.
The terminal sets the network as default automatically and connects to it.
You'll now see a Wi-Fi icon at the top of the display.
If you need to change Wi-Fi usage later:
Select Settings > Network.
Enter your passcode.
Select Wi-Fi. You can now:
Turn Wi-Fi on or off using the WLAN toggle switch.
Add another network as described above.
Board the terminal
On the Confirm store screen, assign the terminal to your store by selecting the check mark button.
If the store shown is not your store, use the edit button to change it.
If the store screen doesn't show, wait until the next synchronization with the Adyen
platform (on average three hours) and try again.
The boarding process is now complete.